In a previous article I wrote that for streaming vDisks to endpoint you don’t necessarily need PXE, you can also attach an ISO to the virtual machine (“Who needs PXE for Citrix Provisioning Services?”). Although this eliminates the dependency for a PXE server (which is challenging to make high available), mounting an ISO file to the CD rom of a virtual machine creates another problem in some hypervisors.

When a hypervisor host needs maintenance a (storage) vMotion is a good way of moving all systems with no downtime. Mounting an ISO file breaks the ability to vMotion with some hypervisors.

Citrix XenServer and VMware vSphere 5 (Hyper-V I’m not sure of) can mount ISO files from shared storage, so this does not apply to all situations.

Fortunately the bootstrap can also be placed on a virtual hard disk (VHD). In this article I’ll guide you step-by-step how this is done. In this example I’m using VMware vSphere 5 but most steps are equal for other hypervisors.

1. Creating the virtual hard disk with bootstrap

First we need to create a virtual hard disk (VHD) where the bootstrap is stored. This can be a small disk, 10 MB is more than enough, that you should store on shared storage. If you store the VHD on local storage it is impossible to vMotion, you might as well stick with an ISO.

A virtual Citrix Provisioning Services (PVS) server is not required, the boot device manager (BDM) can also be ran from a different system. More information about boot device manager can be found in Citrix eDocs.

 

1.1 Creating the VMDK

Select the machine where you want to create virtual hard disk in the vSphere Client (in my example the PVS server) and select ‘Edit Settings’. Create a new virtual hard disk with a capacity of 10MB, accept all other default settings.

vSphere Client - Edit SettingsPVS - Virtual Machine PropertiesAdd HardwareAdd HardwareAdd HardwareAdd HardwareAdd Hardware


1.2 Initialize the disk in Windows

After the VHD is created and attached to the virtual machine the disk needs to be initialize in Windows before it can be used. In the Windows machine open the Server Manager and expand the node Storage > Disk Management.

Server Manager > Storage > Disk Management

If you’ve hot-added the disk you might need to rescan for disks by right clicking the node Disk Management and selecting ‘Rescan Disks’.

Server Manager > Storage > Disk Management > Rescan Disks

Disk Management will detect a new disk and will ask to initialize the disk. Select MBR (Master Boot Record) and click OK. The disk is now visible but has no partitions, it is marked as ‘Unallocated’.

Initialize Disk

Right click the ’Unallocated’ partition and select ‘New Simple Volume’. Accept all defaults, the partition will be recreated by boot device manager anyway.

Server Manager > Storage > Disk ManagementNew Simple Storage WizardNew Simple Storage WizardNew Simple Storage WizardNew Simple Storage WizardNew Simple Storage WizardNew Simple Storage Wizard

The partition needs to be activated. Right click the ‘New Volume’ partition and select ‘Mark Partition as Active’.

Server Manager > Storage > Disk Management > Rescan DisksServer Manager > Storage > Disk Management > Rescan Disks

 

1.3 Add the Citrix PVS bootstrap

Now we have an initialized  virtual hard disk we can add the PVS bootstrap on the disk. Locate the ‘Provisioning Services Boot Device Manager’ in the start menu and launch the application.Provisioning Services Boot Device Manager

Configure the bootstrap to match your environment (don’t use the same as in the screenshots, they might not apply for you).

Boot Device ManagementBoot Device ManagementBoot Device ManagementBoot Device ManagementSDOM ManagementBoot Device

In the last step choose the right Boot Device. A list of disk and partitions is shown, you need to select the VMware Virtual disk 1.0 Partition offset 0MB, size 8MB.

Error loading operating system

It is possible to store the PVS bootstrap on a disk instead of a partition but that comes with a challenge, it is unclear which ‘VMware Virtual disk 1.0’ is the PVS system disk or the 10MB disk for the bootstrap. If you choose the wrong disk (like I did) you’ll ruin your PVS server (Error loading operating system).

 

1.3 Detach virtual hard disk from

We can now detach the virtual hard disk from the server where we placed the PVS bootstrap on the virtual hard disk. You can do this by opening the settings of the server in the vSphere client, selecting the Hard disk you added in step 1.1 and clicking on ‘Remove’. Keep the default ‘Remove from virtual machine’ and don’t delete the files from disk, otherwise your work is lost.
Virtual Machine PropertiesVirtual Machine PropertiesVirtual Machine Properties

You can now move the virtual hard disk (the .vmdk) file to another location if you want to. By default the .vmdk file is stored in the same folder as the virtual machine, but this is not mandatory.

 

 

 

2. Mounting the virtual hard disk to PVS endpoints

Now we have a virtual hard disk (VHD) containing the PVS bootstrap we can mount the disk to the PVS endpoints, instead of an ISO file as explained in “Who needs PXE for Citrix Provisioning Services?

Edit the setting of the virtual machine and add an existing virtual disk. We’re reusing the previously configured disk from step 1. If you’ve changed the location of the .vmdk file you should point to that location. Change the mode to ‘Independent, nonpersistent’.
vSphere Client > Edit settingsVirtual Machine PropertiesAdd HardwareAdd HardwareAdd HardwareAdd HardwareAdd HardwareVirtual Machine Properties

If you already had a virtual hard disk attached (for instance for the PVS write cache) you need to change the Virtual Device Node so the VHD containing the PVS bootstrap is the first hard disk: SCSI (0:0).
Virtual Machine PropertiesVirtual Machine Properties

 

Reason: Failed to lock the file.Note: If you don’t change the mode of the disk to ‘Independent’ the disk cannot be shared by multiple endpoints, when a second machine boots you’ll receive the following error:


6 Comments

  1. I had a customer that needed a backup for when DHCP was out of order.We made a boot iso, but the problem is that with a boot iso the PVS adapter will always be the first NIC of the Virtual Machine.
    This customer had 2 NIC’s and the 2nd NIC was for PVS. If you changed this order in the advanced settings of the VM (vsphere in this case),then the PVS boot worked fine, but the OS gave a BSOD during the start of w2k8r2.

    Is it possible to change the boot iso or disk in such a way that it boots from NIC2?

    Jan

      1. “For sure it works but by default all traffic flows through the NetScaler”.

        All traffic as in all TFTP boot file delivery traffic (which is relatively small considering that the ardpb32.bin file is about 34k) or all vdisk streaming traffic which should not be (if the stream servers included in the boot file is not a NetScaler VIP?

        DSR, USIP etc and all the previous complexities associated with TFTP load balancing in pre NetScaler 10.1 are no longer applicable with native TFTP load balancing available in NS 10.1 though that is not to say using a boot ISO is less attrative.

  2. Great article and thank you for your help. I have one question, with the BDM hard disk in independent mode (non-persistent), I am unable to convert that vm into a template for creating more servers. How do I go about spawning new PVS guests with the BDM information? Thank you.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

en_USEnglish